Commercial-Grade 3x3 Steel Construction: 3x3-inch 11-gauge steel uprights and crossmembers, with 1-inch holes spaced 2 inches on center on all four sides and offset so attachments and hardware sit as close together as the setup requires.
Laser-Cut Upright Numbering: Laser-cut numbers on the front and back of every upright — inward-facing for athletes inside the rack, outward-facing so coaches can adjust lever arms, safety arms and strap safeties from outside it.
42-Inch Working Section: A 42-inch working section sized for multiple body types to move freely under standard and specialty bars.
24-Inch Rear Storage and Spotting Zone: A 24-inch rear section for plate and attachment storage, and a clear spotting zone for coaches when racks sit against a wall.
Proven in Elite Facilities: The same rack specification running in world-class facilities including USC Football.
Description
Championship moments are built long before anyone is watching. The Nike Strength Pro Power Rack is engineered for the daily work behind them, built from 3x3-inch 11-gauge steel with 1-inch holes spaced 2 inches on center on all four sides so athletes can set every attachment exactly where the movement needs it. Laser-cut numbers run both faces of the uprights — inward at the front for athletes working inside the rack, outward at the back so coaches can align safety arms, strap safeties and lever arms without walking around it. A 42-inch working section gives athletes room to move under standard and specialty bars. A 24-inch rear section stores plates and attachments and leaves a coach clear space to spot, even with the rack against a wall. It is the same rack that anchors world-class facilities like USC Football — what ships here is built to that specification, short of the custom plate work and colorways those programs run.
Product Specs
Specs:
Overall LxWxH of rack: 79.87”(2028.8mm) x 52.24” (1326.8mm) x 97.43” (2474.8mm)
Post to Post LxWxH: 75” (1905mm) x 48” (1219.2mm) x 97” (2463.8mm)
Rack With Weight horns LxWxH: 79.87”(2028.8mm) x 68.94” (1751.2mm) x 97.43” (2474.8mm)
Inside width: 42” (1066.8mm)
Inside Dimensions of the rack LxW — Section 1: 42” (1066.8mm) x 42” (1066.8mm); Section 2: 24” (609.6mm) x 42” (1066.8mm)
Hole Diameter: 1” (25.4mm)
Hole Spacing on Center: 2” (50.8mm)
Tubing 3” (76.2mm) x 3” (76.2mm)
Hardware 1” (M24)
Weight: 642.9 lb (291.6 kg)
J-Cup + Rack Weight Capacity: 1100 lb
Weight Horn Load Capacity: 225lb (102kg)
Attachment Compatibility: All Nike Strength Pro Attachments
Installation: Product must be anchored to the floor. Sleeve anchors included for easy install.
Included with rack: one Pair of Nike Strength Pro J Cups, 4 Pairs of Nike Strength Pro Weight Horns – Standard.
Not Included with the Rack: Nike Strength Pro Pull Up Bar
